Bathtub faucets After purchasing a concealed faucet, the sump's spool is generally pre-buried in the wall. Be sure to pay attention to the thickness of the bathroom wall before embedding. If the wall is too thin, the spool will not be buried. The plastic protective cover of the valve plug should not be easily removed when it is buried, so as to prevent the cement and other chores from damaging the valve core when it is buried. In addition, when pre-burying the valve core, you should also pay attention to the up and down and left and right directions of the valve core to avoid the valve core being buried.
The bathtub faucet is generally installed on the side of the bathtub to open the hot and cold mixed water, so that the water can be put into the bathtub for people to use in the bath. At present, the ceramic valve type single handle bathtub faucet and the general bathtub faucet valve are used. Made of brass, the body is chrome-plated, gold-plated and all kinds of metal baking varnish, so it is wear-resistant and water-tight, which is very suitable for wet bathroom space.